The Best Plasma Cutter For Home Shop [Top 10 Updated in 2022]

Is this the Best Plasma Cutter For Home Shop you’re searching for? Overwhelmed by all the options? You’ve arrived at your destination. Below is a comprehensive tips and hints for buying Plasma Cutter For Home Shop. There’s no need to worry if you’re confused about where to begin the research process; we’ve got you covered.

It can be incredibly difficult it is to browse through a plethora of reviews as there are so many options. Take a look at the reviews, and consult this ultimate tutorial to help you make an informed choice when buying.

Disclaimer: The Amazon Affiliate Product Advertising API is used to fetch products from Amazon. This API includes product content, image and logo as well as brand, design, and feature information. These are trademarks of Amazon.com. We may earn an affiliate commission if you purchase through our links.

Comparison Chart for Top Plasma Cutter For Home Shop

Related Posts

Our Recommendation on the 10 Best Plasma Cutter For Home Shop

1. LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2″ Clean Cut

Features:

  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are “LCS22” or “LCS33”. Please search “Lotos LCS22” or “Lotos LCS33”; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.

Additional Info:

Height 26
Width 13
Length 10
Weight 22.5

Check Price Now


2. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features:

  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Additional Info:

Height 19
Width 11
Length 20

Check Price Now


3. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features:

  • Max Severance Thickness: 3/4″
  • ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
  • ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • PAPST Advanced German Cooling System
  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • Max Cut Thickness: 1/2″
  • 50 Amp Digital Inverter Air Plasma Cutter
  • ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

Additional Info:

Color Brown
Height 12
Width 6
Length 15
Weight 19.4

Check Price Now


4. 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine

Features:

  • 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • 🛡️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
  • 🛡️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)

Additional Info:

Color Blue

Check Price Now


5. hynade Plasma Cutter, Dual Voltage 115/230V plasma cutting machine, Inverter Metal Plasma Cutter Max Cutting Thickness 12mm (HYC45D 115/230V)

Features:

  • ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness 10mm@65PSI 40A 230V
  • ✌ Very good to cut car steel (frame), Very light weight and compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, 2mm thin Copper, 4mm Aluminum, It is High frequency touch metal arc starting.
  • ✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness 8mm@65PSI 40A 230V 45A up Power breaker is suggested.
  • ✌ hynade is high level brand at welding field. We focus on welding business more than 20 years. Also we have a service team in American.
  • ✌ Function, Machine with current LED display, 115/230V power lamp, Current knob, Time for post air can be adjust. Duty cycle 60% in 40A, 100% in 30Amps, Maybe the cutting arc not stable if the air less or over the range. We suggest air pressure 65PSI (0.6Mpa), You can get reading from air gauge which come with machine.

Check Price Now


6. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Features:

  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

Check Price Now


7. Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown

Features:

  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ QUICK Setup–the per installed Air filter Regulator with NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ PORTABLE but POWERFUL–the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut

Additional Info:

Color Brown
Height 9
Width 5.5
Length 14

Check Price Now


8. Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP Digital)

Features:

  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ SETUP WITHIN 1 MIN–the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • ★ PACKAGE INCLUDES– power supply, blowback Non-HF start cutting torch, consumables, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator.
  • ★ PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. ★ Non-HF–Non-HF Blowback Start, there is no HF interference.
  • ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. ★SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

Additional Info:

Height 12
Width 7.1
Length 16

Check Price Now


9. TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2″ Clean Cut

Features:

  • Portable: Auto-voltage adapts to 110 V – 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2″ clean cut.
  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life

Check Price Now


10. Pilot Arc Plasma Cutter,120/240V Dual Voltage Non Touch Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI

Features:

  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 2 pcs tips, 2 pcs electrodes, 2 meters air hose, 4 pcs hose clamp, 1 conversion wire adaptor, 1 manual. Following accessories are not included in package, they are fixed at machine: Air regulator, air filter, air gauge
  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality electronic power components, This machine adopt latest IGBT Advanced inverter soft switch technology, Nice cutting surface at 12mm thick, Machine come with high quality consumables
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting thickness in 240v@60PSI 50A; Under 120V, it is 35Amps. Quality cutting thickness is 12mm, Severance cutting thickness 12mm in 120V@60PSI 35Amps
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems

Additional Info:

Color Orange

Check Price Now


Best Plasma Cutter For Home Shop Buying Guide

Plasma Cutter For Home Shop might be a beneficial and bad thing. The most harmful Plasma Cutter For Home Shop can make life miserable and the Best Plasma Cutter For Home Shop will make life easier. There are several factors that decide how good or poor a product is. This includes:

Cost of the Product:

Most people want to get the most value for their money, which is why they check the price first before everything else. If you’re in search of the Top Plasma Cutter For Home Shop take a consider the one that is within your budget.

Main Functions:

Take a look at the major functions of the Plasma Cutter For Home Shop to figure out whether these can benefit you. If you are trying to figure out which Plasma Cutter For Home Shop offers the best primary function, then take a look at what the description says about each Plasma Cutter For Home Shop.

Brand:

What is it that makes Plasma Cutter For Home Shop different from the other? It’s in the name of the brand. A well-known brand can help consumers feel assured that they’re getting trustworthy and known brand.

Positive and Negative Customer Reviews:

A complete assessment of Plasma Cutter For Home Shop will have both positive and negative aspects. To determine if it is worth your time, think about reading some reviews online. The more reviews of satisfied customers you read about the specific Plasma Cutter For Home Shop that you read about, the more probably it’s the case that the product is efficient.

Product Guarantee:

A company that stands behind its products is always preferred by customers. A promise of Plasma Cutter For Home Shop provides you with security when purchasing. It guarantees that the seller is confident about their own product, so you can trust it as well.

Final Words

There’s only the information we can give you about the Best Plasma Cutter For Home Shop. We’re confident that whether you adhere to the suggestions that we’ve offered here You will be able to find something that will suit your needs most. We wish you all the best!

Leave a Comment