Best Miter Gauge – Top 10 in 2022

The purchase of the Best Miter Gauge from the hundreds of available is among the most difficult jobs in the modern world. There are many different makes and versions, and it can be quite confusing.

To help you make the right choice, we have collated as much data as we can on the Top Miter Gauge currently trending to make clear any confusion. If you’ve chosen this particular product, you may have had few doubts in your head, so we’re here to assist.

Disclaimer: The Amazon Affiliate Product Advertising API is used to fetch products from Amazon. This API includes product content, image and logo as well as brand, design, and feature information. These are trademarks of Amazon.com. We may earn an affiliate commission if you purchase through our links.

Comparison Chart for Top Miter Gauge

Related Posts

Our Recommendation on the 10 Best Miter Gauge

1. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

Features:

  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.

Check Price Now


2. Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge

Features:

  • 1 angle stop with indexed stops every 5-degrees
  • Precision angle indexing teeth
  • Table saw that delivers perfect miter cuts the first time
  • Solid-steel laser cut protracter head and gold anodized Track Fence
  • 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play

Additional Info:

Weight 5.9

Check Price Now


3. INCRA MITERV27 Miter V27 Miter Gauge

Features:

  • No-nonsense design and compact size
  • Four expansion points adjust for zero side play
  • Universal Mounting Bracket supports any user-made fence
  • Miter Gauge featuring 27 angle stops for precise incremental control
  • Delivers extreme miter cutting accuracy

Additional Info:

Height 3.5
Width 6.88
Length 17
Weight 2.71

Check Price Now


4. LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230)

Features:

  • DESIGN – Internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners
  • ACCURATE – Crafted from CNC-machined Anodized Aluminum Alloy Steel; Features easy-to-read precision laser engraved scales
  • FORGET ABOUT THE GUESSWORK – Two scales transfer your work angle directly to the miter saw for an accurate Miter cut, and Single cut
  • DO IT RIGHT THE FIRST TIME – Perfect for crown molding, trim work, plumbing, and a variety of other carpentry applications

Additional Info:

Height 0.6
Width 2.5
Length 7.1

Check Price Now


5. Porter Cable 514007535 Miter Gauge Assembly

Features:

  • This is a Porter Cable replacement part
  • Part Number 514007535
  • Fits various Porter Cable models
  • This is an O.E.M. authorized part
  • OEM Part Number 514007535

Additional Info:

Height 1
Width 1
Length 1

Check Price Now


6. Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

Features:

  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.

Check Price Now


7. POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

Features:

  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.
  • INCLUDES: (1) Miter Gauge for Table Saw
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots.

Additional Info:

Height 2.5
Width 4.75
Length 18.94
Weight 2.58

Check Price Now


8. INCRA Miter1000/HD Miter Gauge

Features:

  • Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
  • 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
  • Removable Retaining Clip for T-Slot Miter Channels
  • Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
  • 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length

Additional Info:

Height 3.6
Width 7.8
Length 21
Weight 7.71

Check Price Now


9. DeWalt 5140032-78 Replacement Table Saw Miter Gauge

Features:

  • Compatible with: DW745 Type 1, DW745 Type 2, DW745 Type 20, DW745 Type 3, DW745-B2 Type 1, DW745-B2 Type 3, DWE7480 Type 1, DWE7480 Type 20
  • Measures approximately 11.85 X 5.20 X 2.05 inches
  • Genuine, OEM Dewalt Replacement Part
  • Dewalt replacement gauge, part number 5140032-78

Additional Info:

Height 2.05
Width 5.2
Length 11.85
Weight 0.05

Check Price Now


10. Starrett Miter Saw Protractor, Prosite 505P-7, Angle Finder Gauge Cutting Guide Tool with Laser Scales for Carpenters, Plumbers, Building Trades, DYI Home Improvement, 7” Narrow Plastic

Features:

  • PERFECT FIT: Simply set your saw to the angle that you read on the protractor; Upside down or backward, rest assured that you will always get the correct reading
  • PREMIUM PROTRACTOR: The Prosite 505P-7 is a 175mm (7″) Plastic Saw Miter Protractor that provides accurate angle calculations for transferring and making cuts with the utmost precision
  • MITER CUT & SINGLE CUT TRANSFERS: The miter cut scale transfers readings directly to the miter saw for miter joints; The single cut scale transfers readings straight to the miter saw for butt joints
  • SAVE TIME & REDUCE WASTE: Using an effective protractor like this model, which is made from durable 7-inch hardened plastic, cuts down on working time and helps you to reduce waste
  • EASY TO USE: This measuring tool is an easy to use cutting guide for carpenters, plumbing, builders, and DIY home improvement jobs; It has two laser engraved scales

Additional Info:

Color ํํYellow & White
Height 0.85
Width 9.45
Length 5.4
Weight 0.24

Check Price Now


Best Miter Gauge Buying Guide

Before you invest your hard-earned money into something, you must take the time to learn about the available products and the best alternatives in the market. This is a list of points to take into consideration before buying Miter Gauge to make the process much easier.

Much like any other product before you buy Miter Gauge it is recommended to ask yourself these few questions:

What is the credibility of Miter Gauge relative to its market rivals?

How long-lasting and durable are they? How easy is it to service and repair them whether you have a problem?

What are the benefits of buying Miter Gauge over other items?

What are the most important features and features of Miter Gauge? Are these features worth it to meet your needs?

What are some positives and drawbacks of Miter Gauge and how do they affect your experience as a user?

Where can you buy Miter Gauge as well as repair or service it if needed?

These are just a few of the issues you have to find the solution to when you purchase the product. It is important to keep in mind that you may have further inquiries and questions, and you should.

These are just a few considerations that we think are vital. You can get detailed answers to nearly all of your questions via internet investigation or even by trying out the product in the shop.

Final Words

We selected our Best Miter Gauge Based on these criteria. Do these are the only things that you should consider? Not at all! Our website always contains the most current and up-to-date information.

The final checkpoint we make is the satisfaction of the readers, which is by far the most crucial factor. We appreciate your help!

We would appreciate your feedback if the Miter Gauge provided here is inaccurate, out of date obsolete, ineffective, or out of date. Our list will be periodically updated based upon your recommendations.

Leave a Comment