The Best Cnc Plasma Cutter 2022 – Top 10 Model Reviewed

The Best Cnc Plasma Cutter available is a great choice when you are looking for a new Cnc Plasma Cutter. It’s a asking price-effective option that works in any setting and will provide professional-quality service each and every time.

With this item, you don’t have to worry about the performance. You’ll learn more about this professional-quality product as you continue reading.

Disclaimer: The Amazon Affiliate Product Advertising API is used to fetch products from Amazon. This API includes product content, image and logo as well as brand, design, and feature information. These are trademarks of Amazon.com. We may earn an affiliate commission if you purchase through our links.

Comparison Chart for Top Cnc Plasma Cutter

Related Posts

Our Recommendation on the 10 Best Cnc Plasma Cutter

1. 2021 PowerPlasma 82i 80 Amp CNC compatible plasma cutter

Features:

  • LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″
  • IGBT Infineon Modules / Inverter technology
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor)

Additional Info:

Color Green
Weight 60

Check Price Now


2. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features:

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • Blow-back start technology, Pilot Arc
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
  • 60% duty cycle at 60amps, 110/220 with adapter

Additional Info:

Height 19
Width 11
Length 20

Check Price Now


3. Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

Features:

  • ★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. ★SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ SETUP WITHIN 1 MIN–the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.

Check Price Now


4. hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Features:

  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine)
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up
  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested

Check Price Now


5. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features:

  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • PAPST Advanced German Cooling System
  • ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Max Severance Thickness: 3/4″
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Max Cut Thickness: 1/2″

Additional Info:

Color Brown
Height 12
Width 6
Length 15
Weight 19.4

Check Price Now


6. SPRIGHOLLY Plasma Cutter CNC 50A Non Touch Pilot Arc Low Frequency 110V/220V Dual Voltage Metal Cutter AC 1/2″ Clean Cut Inverter cnc plasma cutting machine for metal crafts 3 year warranty

Features:

  • 【PERFORMANCE】 Automatic 110/220V DC Dual Voltage. 15-55 A DC output, 3/5”(15mm) ideal clean cut and 1” maximum severance cut under 220V. 10-35A DC output, 3/8″(9mm) ideal clean cut and 1/2″(12mm) maximum severance cut under 110V.
  • 【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient!The Non-HF start 16.4ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • 【THREE YEAR WARRANTY】SPRIGHOLLY is a brand you can trust backed by Our 24-hour customer service and after-sales support. You can solve any problems you encounter in the US after-sales center,Add this to your cart now.
  • 【CNC connection】This machine can be connected to a small CNC machine tool for cutting. Convenient operation and intelligent cutting. CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
  • 【Fully Output Circuit Breaker Requiement】 110V @ 50A and 220V @ 30A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Non-touch Low Frequency pilot arc technology: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

Additional Info:

Color Black

Check Price Now


7. LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2″ Clean Cut

Features:

  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are “LCS22” or “LCS33”. Please search “Lotos LCS22” or “Lotos LCS33”; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

Additional Info:

Height 26
Width 13
Length 10
Weight 22.5

Check Price Now


8. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display

Features:

  • 【Dual Voltage】This plasma cutter can automatically adapt to switch input power of 90V-260V(110V-220V), Plug and play in different environments, no external conversion plug required
  • 【Application】 this is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting thickness is 1-20mm, effective cutting thickness 10mm
  • 【High Quality】Cut-50 50AMP plasma cutter is made of high quality components, By adopting the most Advanced inverter technical of switch power, as well as the Product life and work efficiency are increased by 30% than ordinary machines, smooth cutting surface,Permanent supply of high quality consumables
  • 【Portable Design】 Compact plasma cutting machine with LCD digital display and equipped with a portable handle,It is very convenient to operate and carry.Long term supply of consumables.

Additional Info:

Color Blue

Check Price Now


9. Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

Features:

  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room
  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable’s working life
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine

Additional Info:

Weight 8.2

Check Price Now


10. Plasma Cutter Machine 50AMP 110V 220V Automatic SV50D Plasma Cutting Equipment Dual Voltage IGBT Inverter High Frequency 1/2 Clean Cut 3/5 inch Max Cutting 65PSI

Features:

  • Dual voltage capability allows the machine to run directly on 220V 50/60 Hz power, 110V 50/60 Hz. Voltage adapters included in the package.
  • Internal air hose,set the regulator with pressure adjustment allows you to quick connect to your air compressor(1.4CFM), it is visible and easy pressure adjustment. The whole machine can be setup very quickly(with 3 seconds blowing back time to cool down the torch).
  • We provide 2 years warranty for this SV50 plasma cutting equipment(except consumables),please feel free to add to cart and email us with any assistance any time.
  • Cutting Thickness: 3/10″ ideal cutting thickness and 3/5″ maximum cutting thickness under 220V @65PSI. 110/220V output, high frequency 50/60Hz.
  • Widely used for cutting stainless steel alloy steel,mild steel,aluminum,copper and other color metal materials.This SV50D plasma cutter can be widely used at demanding industrial ,construction work, and home hobby use.

Additional Info:

Color White

Check Price Now


Best Cnc Plasma Cutter Buying Guide

Pricing

Anyone would want the best bargain. In this instance, the price is the most important consideration particularly whether you purchase Best Cnc Plasma Cutter from the marketplace.

It’s not likely that you’ll meet a person who doesn’t enjoy purchasing quality products at reasonable costs. You can choose from diverse price ranges offered by various merchants on the market, check them out, and choose the one you think is the best.

BRANDING

When you buy Cnc Plasma Cutter from the marketplace it is important to assess the brand. Different sellers offer different kinds of brands, so you must be aware of how to discern them to make the best choice. Brands that are high-end are more expensive and less well-known brands.

Efficacy

Before purchasing Cnc Plasma Cutter make sure you understand the operation. The majority of times, it’s based in the specification of the device.

The more complex the specifications, the greater the functionality.

Customer Reviews From Former Users

This is exactly what smart buyers do. Old customers often provide feedback about their experience with Cnc Plasma Cutter.

Scroll down on the product page to see the review. These reviews are typically displayed on the same page for the product.

If you go through the reviews, you’ll be aware if the brand you are planning to purchase Cnc Plasma Cutter does a great job or bad!

Conclusion

The maintenance of all Cnc Plasma Cutter details on the site up-to-date is a top priority this is why we continuously update our websites. Discover more about us via the internet for sources.

We’d appreciate prompt feedback whether you believe that something we have published here on Cnc Plasma Cutter is insignificant, inaccurate or misleading. We’re there for you every step of the way. Get in touch with us. You can also read about us to get a better understanding of our vision.

Leave a Comment