The Best Air Compressor For Plasma Cutter [Top 10 Updated in 2022]

Buying the Best Air Compressor For Plasma Cutter from the multitude of models available is one of the most difficult things to do in todayโ€™s world. There are a variety of different models and variants, and it is a bit confusing.

For your convenience, we have put together as much info as we could about Top Air Compressor For Plasma Cutter trending these days to clear up any confusion. If youโ€™ve chosen this particular product, you might have had a couple of questions and weโ€™re here help.

Disclaimer: The Amazon Affiliate Product Advertising API is used to fetch products from Amazon. This API includes product content, image and logo as well as brand, design, and feature information. These are trademarks of Amazon.com. We may earn an affiliate commission if you purchase through our links.

Comparison Chart for Top Air Compressor For Plasma Cutter

Related Posts

Our Recommendation on the 10 Best Air Compressor For Plasma Cutter

1. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Features:

  • Max Severance Thickness: 3/4″
  • โ˜… ๐๐š๐œ๐ค๐š๐ ๐ž ๐ˆ๐ง๐œ๐ฅ๐ฎ๐๐ž๐ฌ: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.
  • โ˜… ๐๐š๐ฉ๐ฌ๐ญ ๐€๐๐ฏ๐š๐ง๐œ๐ž๐ ๐‚๐จ๐จ๐ฅ๐ข๐ง๐  ๐’๐ฒ๐ฌ๐ญ๐ž๐ฆ: ensures the plasma cutter has a stable and durable high performance.โ˜… ๐ƒ๐ฎ๐š๐ฅ ๐•๐จ๐ฅ๐ญ๐š๐ ๐ž ๐ˆ๐ง๐ฉ๐ฎ๐ญ: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • Max Cut Thickness: 1/2″
  • โ˜… ๐’๐š๐Ÿ๐ž & ๐š๐ญ ๐‹๐จ๐ฐ ๐‚๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • PAPST Advanced German Cooling System
  • โ˜… ๐Ž๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐ž๐ซ๐Ÿ๐จ๐ซ๐ฆ๐š๐ง๐œ๐ž: 10-50A DC output, 1/2โ€ ideal clean cut and 3/4โ€ maximum severance cut under 220/240V. 10-35A DC output, 1/3″ ideal clean cut and 2/5″ maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • 50 Amp Digital Inverter Air Plasma Cutter

Additional Info:

Color Brown
Height 12
Width 6
Length 15
Weight 19.4

Check Price Now


2. Plasma Cutter Machine 50AMP 110V 220V Automatic SV50D Plasma Cutting Equipment Dual Voltage IGBT Inverter High Frequency 1/2 Clean Cut 3/5 inch Max Cutting 65PSI

Features:

  • Cutting Thickness: 3/10″ ideal cutting thickness and 3/5″ maximum cutting thickness under 220V @65PSI. 110/220V output, high frequency 50/60Hz.
  • Internal air hose,set the regulator with pressure adjustment allows you to quick connect to your air compressor(1.4CFM), it is visible and easy pressure adjustment. The whole machine can be setup very quickly(with 3 seconds blowing back time to cool down the torch).
  • We provide 2 years warranty for this SV50 plasma cutting equipment(except consumables),please feel free to add to cart and email us with any assistance any time.
  • Widely used for cutting stainless steel alloy steel,mild steel,aluminum,copper and other color metal materials.This SV50D plasma cutter can be widely used at demanding industrial ,construction work, and home hobby use.
  • Dual voltage capability allows the machine to run directly on 220V 50/60 Hz power, 110V 50/60 Hz. Voltage adapters included in the package.

Additional Info:

Color White

Check Price Now


3. PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

Features:

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Blow-back start technology, Pilot Arc

Additional Info:

Height 19
Width 11
Length 20

Check Price Now


4. Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown

Features:

  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • โ˜… INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5โ€ ideal clean cut and 1/2โ€ maximum severance cut
  • โ˜… PORTABLE but POWERFUL–the Lotos LT3500 can easily cut up to 2/5โ€(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • โ˜… INPUT & OUTPUT–110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5โ€ ideal clean cut and 1/2โ€ maximum severance cut
  • โ˜… QUICK Setup–the per installed Air filter Regulator with NPT 1/4โ€ industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.

Additional Info:

Color Brown
Height 9
Width 5.5
Length 14

Check Price Now


5. Lotos LTP8000 80 A Plasma Cutter with Pilot Arc Metal Cutter 220~240V, 1 inch Clean Cut, Brown

Features:

  • โ˜… CUT THICKNESS: Ideal Cut: 1″ Inch; Maximum: 1 1/2″ Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. โ˜… INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
  • โ˜…NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. โ˜… 2T/4T ENABLED: Release your finger for long time cutโ˜… THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000 Plasma Cutter are: BCON40 and BCON90. Please search “Lotos BCON40” or “BCON90”
  • โ˜… PACKAGE INCLUDES: 70AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • โ˜… SETUP WITHIN 1 MIN: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.

Additional Info:

Color Brown
Weight 38

Check Price Now


6. Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown

Features:

  • Built in Air Compressor
  • No gas pressure settings for flame tuning needed
  • Smaller heat-affected zone for less warping
  • Cuts faster than oxy fuel
  • More precise cut, thinner kerf, less slag to clean up

Additional Info:

Color Brown
Height 11.25
Width 18.5
Length 16.5
Weight 31

Check Price Now


7. CRAFTSMAN Air Compressor, 6 Gallon, Pancake, Oil-Free with 13 Piece Accessory Kit (CMEC6150K)

Features:

  • NO MAINTENANCE: Durable, oil-free pump of the 6 gallon air compressor is made for long-life and no maintenance
  • PRESSURE: 150 Max PSI to ensure adequate cut-inch pressure for a variety of applications
  • QUICK RECOVERY TIME: 2.6 SCFM at 90 PSI allows for quick compressor recovery time
  • The portable air compressor is proudly made in the USA with Global Materials in Jackson, Tennessee
  • PORTABLE: 6 gallon capacity maximizes portability and stored air for CRAFTSMAN air compressor

Additional Info:

Height 17.88
Width 16.5
Length 16.5
Weight 32.5

Check Price Now


8. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display

Features:

  • ใ€Dual Voltageใ€‘This plasma cutter can automatically adapt to switch input power of 90V-260V(110V-220V), Plug and play in different environments, no external conversion plug required
  • ใ€Applicationใ€‘ this is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting thickness is 1-20mm, effective cutting thickness 10mm
  • ใ€High Qualityใ€‘Cut-50 50AMP plasma cutter is made of high quality components, By adopting the most Advanced inverter technical of switch power, as well as the Product life and work efficiency are increased by 30% than ordinary machines, smooth cutting surface,Permanent supply of high quality consumables
  • ใ€Portable Designใ€‘ Compact plasma cutting machine with LCD digital display and equipped with a portable handle๏ผŒIt is very convenient to operate and carry.Long term supply of consumables.

Additional Info:

Color Blue

Check Price Now


9. Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP Digital)

Features:

  • โ˜… PORTABLE and POWERFUL–The LTP5500D can easily cut 3/5โ€ (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. โ˜… Non-HF–Non-HF Blowback Start, there is no HF interference.
  • โ˜…INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. โ˜…OUTPUT: 20-55 A DC output, 3/5โ€ ideal clean cut and 1โ€ maximum severance cut under 220/240V. 20-35A DC output, 3/8″ ideal clean cut and 1/2″ maximum severance cut under 110/120V. โ˜…SUITABLE CUTTING–for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. โ˜… US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • โ˜… SETUP WITHIN 1 MIN–the per-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • โ˜… PACKAGE INCLUDES– power supply, blowback Non-HF start cutting torch, consumables, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator.

Additional Info:

Height 12
Width 7.1
Length 16

Check Price Now


10. DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)

Features:

  • 2 universal couplers to easily support two users
  • High efficiency motor of the electric air compressor is made for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less]
  • Ball drain valve for quick & thorough tank draining
  • High flow regulator and couplers of DEWALT portable air compressor are designed to maximize air tool performance
  • 78.5 dBA noise level of the 6 gallon air compressor is made for a quiet work environment
  • 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered @ 90 PSI pump, enable long tool run time with quick recovery for the portable air compressor
  • 30 lb weight makes unit easy to carry/store
  • Outlet tube rerouted to avoid being catch point
  • Long life oil free pump for maintenance free operation
  • Console cover protects controls and is removable to allow easy repair

Additional Info:

Height 17.5
Width 16
Length 16
Weight 30

Check Price Now


Best Air Compressor For Plasma Cutter Buying Guide

Selecting Air Compressor For Plasma Cutter is not the easiest task. There are hundreds of alternatives that you can discover in the market, and each comes with its own pros and cons. However, whether you want to make sure youโ€™re making the right decision We suggest that you look over the below buying guide.

Product Specifications:

Every product has its own specifications you must know prior to purchasing the product. For Air Compressor For Plasma Cutter There are a few specifications you must know prior to buying the product to ensure that it is suited to your requirements.

Product Qualitative:

If you are going to purchase Air Compressor For Plasma Cutter it is important to examine the quality of the product to ensure itโ€™s made from top-quality materials. This is due to the fact that a high-quality Air Compressor For Plasma Cutter will provide you with superior results and can last for longer time than other product on the market.

Top Brands:

If you do not want to purchase the incorrect product, we suggest that you research Top Air Compressor For Plasma Cutter brands and choose one. That way, youโ€™ll be sure that the product will meet your requirements and it will last longer than youโ€™d like.

The Price of the Product

Prior to purchasing Air Compressor For Plasma Cutter If you are considering buying Air Compressor For Plasma Cutter, it is an ideal idea to investigate the price. This is is what you should do whether you donโ€™t want to end up with an item that is priced out of your budget.

Review of Product by Customer:

Reviews from the customer of a product can aid you with making the right buying decision. In this situation we strongly suggest that you check out what people are saying about Air Compressor For Plasma Cutter before you purchase the product. This way, you can learn if it has any downsides to the product and decide whether or not it is worth your money.

Return Policy for Products:

If youโ€™re not completely satisfied with the quality of your Air Compressor For Plasma Cutter You have the opportunity to exchange it. But, the majority of the time , you wonโ€™t be eligible to return the item if you change your opinion about it. That is why we recommend checking out the product returns policy before buying anything from a store on the market.

Customer Support:

If you have any questions regarding the Air Compressor For Plasma Cutter You should not delay in contacting the customer support team. So, you can submit your queries and receive answers for them quickly.

Last Thoughts

With this review, our readers will be able to locate the right Air Compressor For Plasma Cutter solution that will meet their needs and expectations. If youโ€™re not sure what to buy then please email us for more information.

Leave a Comment